Table of Contents
Advertisement
DSL
Ethernet (1-4)
USB
Console
WPS
Reset
Power
Power Switch
Connect the supplied RJ-11 ("telephone") cable on this
port when connecting to the ADSL/telephone network.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the LAN ports when connecting to a PC or an office/home
network of 10Mbps, 100Mbps or 1000Mbps.
Connect the USB cable on this port 3G/ HSDPA USB
modem backup for Internet access.
Console port.
Push WPS button to trigger Wi-Fi Protected Setup
function.
To be sure the device is being turned on
button for:
•
1-3 seconds: quick reset the device.
•
6 seconds above, and power off, power
on the device: restore to factory default
settings. (Cannot login to the router or forgot
your Username/Password.
for more than 6 seconds).
After pressing the RESET button for more than 6 seconds,
to be sure you power cycle the device again.
Power ON/OFF switch
Connect the supplied power adapter to this jack.
15
press RESET
Press the button
Advertisement
Table of Contents
