Atlantis Land Web Share 3G 244WN User Manual page 38

Make sure that the parameters are, the ones in the picture, if not specifically shown by
the ISP.
Click Apply in order to start Wireless configuration.
IPOA (Classical IP over ATM)
This configuration is valid in case of a subscription with a static IP with NAT (please
check the Manual in order to check different configuration). Make sure that the
parameters are, in case of RFC1577, the ones in the picture, if not specifically shown
by the ISP.
Insert then the public static IP address given by the ISP and choose Protocol=IPOA
(RFC1577...). Make sure that the parameters are, the ones in the picture, if not
specifically shown by the ISP.
Click on Apply in order to start Wireless configuration.
Pure Bridge
This configuration is valid in case of You would like to use WebShare 3G 244WN as an
Ethernet modem (PPPoE stack on PC is necessary in order to establish a connection).
38