Table of Contents
Advertisement
Exit
When you finish viewing or changing settings, select Exit from the menu bar at the
top of the IBM Setup Utility screen, then select Save and exit the Setup Utility
and press Enter. If you do not want to save your changes, select Exit the Setup
Utility without saving and press Enter.
If you want to save a change, but you do not want to leave the IBM Setup Utility
program, select Save Settings and press Enter.
You can select Restore Settings to load previous values for all Setup items, or your
can Load Default Settings for the computer.
Using the SCSISelect Utility program (some models)
SCSISelect is a built-in, menu-driven configuration utility program that you can use
for models that come with a SCSI adapter to:
v View the default SCSI IDs
v Locate and correct configuration conflicts
v Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
program and descriptions of the menu choices available.
Starting the SCSISelect Utility program
To start the SCSISelect utility program:
1. Turn on the computer.
2. When the
3. When the
4. Use the arrow keys to select a choice from the menu.
5. Follow the instructions on the screen to change the settings of the selected
SCSISelect menu choices
The following choices appear on the SCSISelect Utility menu:
v Configure/View Host Adapter Settings
34
IBM IntelliStation E Pro Types 6204 and 6214: User's Guide
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you
to type the password to start the SCSISelect Utility program.
question appears, make your selection and press Enter.
v Press Esc to return to the previous menu.
v Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
items, and press Enter.
Select this choice to view or change the SCSI controller settings. To reset the
SCSI controller to its default values, press F6; then, follow the instructions that
appear on the screen.
prompt appears,
Advertisement
Table of Contents
Troubleshooting
