IBM 620410U - IntelliStation E - Pro 6204 User Manual page 82

Installing a SCSI adapter: Some models do not come with SCSI adapters. Do
the following to install an optional SCSI adapter:
1. If you do not have a preinstalled SCSI adapter, complete steps 1 through 9 of
2. Connect the SCSI signal cable to the adapter and one or more of the signal
3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
4. If you have other adapters or options to install or remove, do so now.
5. Rotate the front adapter-support bracket to the closed (locked) position.
6. Reinstall the rear adapter-support bracket; then rotate it to the closed (locked)
7. Replace the support bracket.
8. Replace the cover, see "Replacing the cover" on page 76 for details.
9. Reconnect the external cables and power cords; then turn on the attached
66
IBM IntelliStation E Pro Types 6204 and 6214: User's Guide
"Installing an adapter" on page 64.
cable connectors to the rear of the SCSI devices.
connector (J35) on the system board. See "System board" on page 41 for the
location of the SCSI LED connector.
position.
devices and the computer.