IBM 620410U - IntelliStation E - Pro 6204 User Manual page 98

Setting SCSI IDs: Each SCSI device connected to a SCSI controller must have a
unique SCSI ID. This ID enables the SCSI controller to identify the device and
ensure that different devices on the same SCSI channel do not attempt to transfer
data simultaneously. SCSI devices that are connected to different SCSI channels
can have duplicate SCSI IDs. Refer to the documentation that comes with the
device for instructions about setting its SCSI ID. With a SCSI adapter installed in
your computer, you can use its 68-pin SCSI connector to connect different types of
SCSI devices.
1
34
35
68
To install SCSI devices, you must have an optional PCI SCSI adapter installed.
Refer to the documentation that comes with the device for instructions to set its
SCSI ID.
82
IBM IntelliStation E Pro Types 6204 and 6214: User's Guide