Wall Mounting - Acroprint ES900 User Manual

W M
ALL OUNTING
The ES900 should be mounted on 1/2 inch drywall using two ST 4x20 screws and
fasteners.
1. Install the supplied wall-mount screws by using the template. Refer to
Screws below.
Be sure to keep about 6mm (1/4") of the screw head away from the wall. The
recommended height from the floor to the bottom of the unit is 45".
2. Open the unit. Refer to
3. Hang the unit on the wall and install Wall Mount Brackets. Refer to
4. Close the unit. Refer to
ES900 User's Manual
Install Wall-Mount Screws
"Open Unit" on page
Hang Unit
"Close Unit" on page
3.
4.
Install Wall-Mount
Hang Unit below.
61