Wall Mounting Instructions - Acroprint ATR480 User Manual

In order to use a bell or horn a relay is required. Please call Acroprint or your Dealer to order
the relay (PN 01-0230-000).
When a signal is activated by the clock the internal contacts of the relay close and complete the
circuit. These internal contacts are "dry" and supply no voltage. Voltage applied to these
contacts must not exceed 30 volts. The relay then activates the 120v external signal device
such as:
65-0103-000 "Grille Horn"
65-0104-000 "4-1/4" Bell"
65-0105-000 "8" Bell"
For more information about connecting an external signal device using a relay go to:
Under "Time Clocks & Document Stamps" click on "ATR480 Time Clock" in the drop down
menu and download 06-0346-000 "Connecting an External Signal Device".
See the section "Alarm Settings (Mode ES02)" for info on setting up schedules on the ATR480.

Wall Mounting Instructions

The ATR480 can be placed on a table or desk and it can also be mounted to a wall. A mounting
template is included with the documents for the ATR480. If you misplace the template you can
download it at:
Under "Time Clocks & Document Stamps" click on "ATR480 Time Clock" in the drop down
menu.
Follow the instructions on the template to mount the clock.
http://support.acroprint.com
http://support.acroprint.com
22
ATR480 Time Recorder | User's Manual