Acroprint ES900 User Manual page 41

Setting the 1st Command Line
1. Press SELECT until the
2. The flashing digit indicates "Character Position".
3. Press SET.
Set 1st Character Code
1. The flashing digit changes from "Character Position" to "Character Code".
2. In this example, the 1st character is "A". Press CHANGE until the Character Code is"02" (A).
Refer to "Character Code for Alphanumeric" on pages
3. Press SET.
ES900 User's Manual
is under the "COMMENT" mark.
COMMENT
SELECT CHANGE SET
64-68.
35