Acroprint ES900 User Manual page 45

Set 3rd Character Code
1. In this example, the 3rd character is "MONTH". Press CHANGE until the Character Code is
"27" (MONTH). Refer to
2. Press SET.
Follow the same procedures as outlined above for setting further Character Codes.
Setting the 3rd Command Line
1. Press SET twice to change the comment line number to "C3".
2. The flashing digit indicates "Character Position".
3. Press SET.
4. The "Character Position" changes to the "Character Code".
ES900 User's Manual
"Character Code for Alphanumeric" on pages 64-68.
39