Acroprint ES900 User Manual page 33

Change Number of Digits
The Number of Digits can be set from 1 to 8.
1. In this example, press CHANGE until the number digit is "4".
2. Press SET.
3. The flashing digit changes from "Number Digit" to "Repeat Times".
Change Repeat Times
The Repeat Times can be set from 0 to 9. The "0" means no advancing of numbers.
If the recorder is set to repeat 0 times, the number will not advance.
1. In this example, press CHANGE until the option is "2".
2. Press SET.
ES900 User's Manual 27