Change the Date
1. In this example, press CHANGE until the date is "02". Refer to
2. Press SET.
3. The "Ending Date" of the display changes from flashing to steady and the
displayed under "SU".
Numbering Print
Prior to enabling Numbering Print, refer to
that you have set up the print order options to allow Numbering Print (options 19
through 29 allow Numbering Print).
In this setup, you can select digits of:
• Printed Number
• Repeat Times of Number
• Type of Number Reset
Example: Change the Number Digit to 4 digits, the Repeat Times to 2, and the Reset to 0.
1. Press SELECT until the
2. The flashing digit indicates "Number Digit".
26
is beside the "NUMBER" mark.
DST on page
Print Order Options on page 14
22.
mark is
to ensure