Post-Installation Instructions - Acer ALTOS R910 Series User Manual

34
Warning! Failure to properly turn off the server before you
start installing components may cause serious damage. Do
not attempt the procedures described in the following
sections unless you are a qualified service technician.

Post-installation instructions

Perform the steps below after installing a server component:
1 See to it that all components are installed according to the
described step-by-step instructions.
2 Reinstall all hardware structure or cable that have been previously
removed.
3 Reinstall the top cover.
4 Reinstall the front bezel.
5 Connect the necessary cables.
6 Turn on the system.
3 System upgrade