Intel SC5650BCDP Software User's Manual page 195

Number
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
®
Intel RAID Software User's Guide
Type
Info Current capacity of the battery is below threshold
Info Current capacity of the battery is above threshold
Info Enclosure (SES) discovered on %s
Info Enclosure (SAF-TE) discovered on %s
Critical Enclosure %s communication lost
Info Enclosure %s communication restored
Critical Enclosure %s fan %d failed
Info Enclosure %s fan %d inserted
Critical Enclosure %s fan %d removed
Critical Enclosure %s power supply %d failed
Info Enclosure %s power supply %d inserted
Critical Enclosure %s power supply %d removed
Critical Enclosure %s SIM %d failed
Info Enclosure %s SIM %d inserted
Critical Enclosure %s SIM %d removed
Warning Enclosure %s temperature sensor %d below warning threshold
Critical Enclosure %s temperature sensor %d below error threshold
Warning Enclosure %s temperature sensor %d above warning threshold
Critical Enclosure %s temperature sensor %d above error threshold
Critical Enclosure %s shutdown
Warning Enclosure %s not supported; too many enclosures connected to port
Critical Enclosure %s firmware mismatch
Warning Enclosure %s sensor %d bad
Critical Enclosure %s phy %d bad
Critical Enclosure %s is unstable
Critical Enclosure %s hardware error
Critical Enclosure %s not responding
Info SAS/SATA mixing not supported in enclosure; PD %s disabled
Info Enclosure (SES) hotplug on %s was detected, but is not supported
Info Clustering enabled
Info Clustering disabled
Info PD too small to be used for auto-rebuild on %s
Info BBU enabled; changing WT virtual disks to WB
Description
181