Whirlpool HE2t - 3.7 cu. Ft. Front Load Washer User Manual page 69

b) Remove the flat nuts from the tub.
Remove Flat Nuts
c) Mark the edges of the tub clamps with
a pencil to make it easier to reinstall
later.
d) Use a large flat-blade screwdriver and
pry off the tub clamps.
Pencil Marks
Tub Clamp
e) Use a large flat-blade screwdriver and
pry the tub halves apart, then lift the
rear half of the tub off the front half
(see the top right photo).
f) Lift the basket from the front half of the
tub.
Screwdriver
Pry Clamp Off
4-31
Front Half Of Tub
Rear Half Of Tub
Basket