Lexmark E230, E232, E234(N), E330, And E332N - Lexmark 22L0176 - C 770dn Color Laser Printer Manual

Lexmark E230, E232, E234(n), E330, E332n: Overview of card stock and label support
Paper source
Tray 1
Manual feed
For paper and transparency specifications, see the Lexmark E230/E232/E234(n)/E330/E332n Publications CDs.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: To minimize curl, use the rear exit when printing on card stock and labels.
Maintenance procedures
If the print quality begins to degrade when printing sheets of labels, we suggest you follow the three cleaning steps below:
1
Print 5 sheets of paper.
2
Wait approximately 5 seconds.
3
Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print cartridge, more often
with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and
fuser problems.

Lexmark E230, E232, E234(n), E330, and E332n

Lexmark E230, E232, E234(n), E330,
and E332n
Limit label printing to occasional use of paper office labels designed for
laser printers. We do not recommend using vinyl or polyester labels.
The Lexmark E230, E232, E234(n), E330, and E332 support stocks up to
43 lb (163 g/m
paper labels.
The following table lists the maximum basis weights supported by Tray 1
and the manual sheet feeder. More detailed specifications appear on the
following page.
Card stock
Index Bristol
–
2
163 g/m 163 g/m
210 to 216 mm (8.3 to 8.5 in.)
279 to 297 mm (11 to 11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
Up to 163 g/m
Up to 163 g/m
2
). The automatic paper feeder can hold up to 50 sheets of
Tag Cover
– –
2
–
2
(43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
84
Labels
Paper Vinyl
2
163 g/m –
2
163 g/m –