Optra W810: Overview of card stock and label support
Paper source
Tray 1
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
When printing on labels:
•
Set the Paper Type to Labels in the Paper Menu.
•
Do not use label sheets with a slick backing material.
•
Do not print within 1 mm (0.040 in.) of the die cut, the edge of the label, the perforations, or between the die cuts.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.040 in.) away from the edges. Adhesive material may contaminate your printer and could void
your warranty.
When printing on card stock:
•
Set the Paper Type to Plain Paper. The Lexmark W810 treats card stock the same as Plain Paper. It does not
adjust the print speed or fuser temperature when the Paper Type is set to Card Stock.
•
Do not use card stock that is creased. It may cause paper jams.
•
We recommend the use of grain long card stock.
Optra W810
Optra W810
Limit label printing to occasional use of A4 or letter size paper labels designed
for laser printers. We do not recommend using vinyl or polyester labels.
The Optra W810 supports stocks up to 43 lb (163 g/m
and card stock from tray 1, which holds up to 50 sheets of labels or card stock.
The following table lists the maximum basis weights supported by tray 1.
Card stock
Index Bristol
2
163 g/m
163 g/m
Width:
Length:
Weight:
Thickness:
Smoothness:
Width:
Length:
Weight:
Tag
Cover
2
–
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
2
120 to 128 g/m
(32 to 34 lb.)
0.13 to 0.20 mm (0.005 to 0.008 in.)
100 to 400 Sheffield*
210 to 216 mm (8.3 to 8.5 in.)
279 to 356 mm (11 to 11.7 in.)
2
Up to 163 g/m
Index Bristol (90 lb)
137
2
). Always feed labels
Labels
Paper
Vinyl
2
163 g/m
–
Need help?
Do you have a question about the 22L0176 - C 770dn Color Laser Printer and is the answer not in the manual?
Questions and answers