Grain Orientation - Lexmark 22L0176 - C 770dn Color Laser Printer Manual

Use the following table to compare the weights of various types of card stock.
Card stock weights comparison guide
Bond
Metric 431.8 x
equivalent 558.8 mm
2
(g/m ) (17 x 22 in.)
75 20
90 24
105 28
108 29
118 31
120 32
131 35
135 36
148 39
163 43
176 47
199 53
203 54
Card stock weights may vary ± 5%.
Depending on the printer, material thicker than 0.30 mm (0.012 in.) may present feed reliability problems, and material
thicker than 0.17 mm (0.007 in.) may reduce print quality. Contact your supplier to determine the weight of any card stock
you currently use.
See the individual printer specifications in this document for more information about the card stock weights your printer
supports.

Grain orientation

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain short, running the width of the
paper, or grain long, running the length of the paper.
The orientation of the grain contributes to the rigidity of card stock and affects feed reliability. The recommended grain
orientation depends on the weight of the stock and whether the printer feeds the stock short-edge first or long-edge first.
For lighter card stocks, grain long is recommended to reduce potential curl problems. Curl may decrease the ability of the
form to move reliably through the printer.
Most printers feed paper short-edge first. If your printer supports larger paper sizes, such as 11x17 in. or A3, it may feed
some paper sizes long-edge first. See your printer documentation for more information.
Grain orientation
Basis weight (lbs/ream)
Offset Cover
635 x 508 x
965.2 mm 660.4 mm
(25 x 38 in.) (20 x 26 in.)
50 –
60 –
70 –
– 40
80 –
– –
90 –
– 50
100 –
– 60
120 65
– –
– –
11
Printing Index
Bristol Bristol
571.5 x 647.7 x
889 mm 774.7 mm
(22.5 x 35 in.) (25.5 x 30.5 in.)
– –
– –
– –
– –
– –
– 67
– –
– –
– –
– 90
– –
110 110
– –
Tag
609.6 x
914.4 mm
(24 x 36 in.)
50
–
–
–
–
74
–
–
–
100
–
–
125