Lexmark E250, E350, E450N - Lexmark 22L0176 - C 770dn Color Laser Printer Manual

E250
sheets in tray 1. Card stock must be sent through the manual feeder one sheet at a time.
The following table lists the maximum basis weights supported by Tray 1, Tray 2, and the manual sheet feeder.
Lexmark E250, E350, E450n: Overview of card stock and label support
Paper source
Tray 1
Tray 2
Manual Feed
Card stock should be short grain and set to exit the rear door.
For paper and transparency specifications, refer to the printer publications CD.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: To minimize curl, use the rear exit when printing on card stock and labels.
Maintenance procedures
If the print quality begins to degrade when printing sheets of labels, we suggest you:
Print 5 sheets of paper, wait approximately 5 seconds, then print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print cartridge, or more often
with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and
fuser problems.

Lexmark E250, E350, E450n

E350 E450n
Card Stock
Index Bristol Tag
–
–
2
163 g/m 163 g/m
89 to 216 mm (3.5 to 8.5)
210 to 356 mm (8.27 to 14 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
From 60 to 163 g/m
From 75 to 163 g/m
Lexmark E250, E350,
E450n
Limit label printing to occasional use of
paper office labels designed for laser
printers. We do not recommend using vinyl
or polyester labels.
The printer supports paper and label stock
from 60—90 g/m
43 lb (163 g/m
Cover
– –
– –
2
–
2
(43 lb)
2
Index Bristol (16—90 lb)
2
Tag (50—100 lb)
32
2
and index card stock up to
2
). You can load up to 50 label
Labels
Paper Vinyl
2
163 g/m –
2
163 g/m –
2
163 g/m –