Optra E310, E312 - Lexmark 22L0176 - C 770dn Color Laser Printer Manual

Optra E310, E312: Overview of card stock and label support
Paper Source
Automatic Paper Feeder
Manual Sheet Feeder
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: Always use the front exit when printing on card stock. To minimize curl, use the front exit when printing on labels.
Maintenance procedures
If the print quality begins to degrade when printing sheets of labels, we suggest you follow the three cleaning steps below:
1
Print 5 sheets of paper.
2
Wait approximately 5 seconds.
3
Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print cartridge, more often
with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and
fuser problems.

Optra E310, E312

Optra E310, E312
Limit label printing to occasional use of paper office labels designed for
laser printers. We do not recommend using vinyl or polyester labels.
The Optra E310 and Optra E312 support stocks up to 43 lb (163 g/m
automatic paper feeder can hold up to 10 sheets of card stock or labels.
The following table lists the maximum basis weights supported by the
automatic paper feeder and the multipurpose feeder.
Card Stock
Index Bristol Tag
2 2
163 g/m 163 g/m
2 2
163 g/m 163 g/m
210 to 216 mm (8.3 to 8.5 in.)
279 to 297 mm (11 to 11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
Up to 163 g/m
Up to 163 g/m
113
Cover Paper
2
– 163 g/m
2
– 163 g/m
2
(43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
2
). The
Labels
Vinyl
–
–