Lexmark 22L0176 - C 770dn Color Laser Printer Manual page 130

Troubleshooting
The following table provides solutions for some common card stock and label problems. See your printer documentation for
more troubleshooting information.
Solutions to printing problems
Problem
Print on heavy stock is blurred or
out of focus.
Toner rubs off the page.
Printing shows voids.
Optra S
When printing on heavy stock, make sure the Paper Type setting is appropriate for
your print material. (Note: Card stock in excess of 203 g/m
produce acceptable print results.)
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets of
paper to remove any toner that may have accumulated.
Make sure the Paper Type setting is appropriate for your print material.
Use a lighter weight stock. (The material being used exceeds 300 g/m
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets of
paper to remove any toner that may have accumulated.
Change the Paper Type to Plain Paper.
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets of
paper to remove any toner that may have accumulated.
130
Solution
2
[54 lb bond] may not
2
.)