Table of Contents
Advertisement
Lexmark E120: Overview of card stock and label support
Paper source
Tray 1
Manual feed
For paper and transparency specifications, see the Lexmark E220 Publications CD.
Media specifications
Labels
Width:
Length:
Weight:
Thickness:
Smoothness:
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
Weight:
Note: To minimize curl, use the top exit when printing on card stock and labels.
Maintenance procedures
If the print quality begins to degrade when printing sheets of labels, we suggest you follow the three cleaning steps below:
1
Print 5 sheets of paper.
2
Wait approximately 5 seconds.
3
Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print cartridge, more often
with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and
fuser problems.
Lexmark E120
Lexmark E120
Limit label printing to occasional use of paper office labels designed for laser
printers. We do not recommend using vinyl or polyester labels.
The Lexmark E120 supports stocks up to 43 lb (163 g/m
paper feeder can hold up to 10 sheets of card stock or labels.
The following table lists the maximum basis weights supported by Tray 1 and
the manual sheet feeder. More detailed specifications appear on the following
page.
Card stock
Index Bristol
2
135—163 g/m
(up to 90 lb)
2
135—163 g/m
(up to 90 lb)
210 to 216 mm (8.3 to 8.5 in.)
279 to 297 mm (11 to 11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
Up to 163 g/m
Up to 163 g/m
85
Labels
Paper
60—163 g/m2 (16—43 lb)
60—163 g/m2 (16—43 lb)
2
(43 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
2
). The automatic
Vinyl
–
–
Advertisement
Table of Contents
