Service Mode; Service Mode Operations - Canon BJC 6000 - Color Inkjet Printer Service Manual

Part 3: Operating Instructions

3.6 Service Mode

This printer has a service mode for service-related settings or performing test printing.
The operator panel buttons are used to enter service mode.

3.6.1 Service mode operations

1) With the printer powered off, while pressing the RESUME button, press the POWER
button. The buzzer will sound once.
2) While holding down the POWER button, release the RESUME button. Press the
RESUME button twice in succession, and then release the POWER button. (Each time
the RESUME button is pushed, the buzzer will sound once.) The indicator will blink
in green, and then light in green.
3) Select one of the following service mode functions by pressing the RESUME button
the specified number of times.
Press
Zero times
1 time
2 times
3 times
4 times
5 times
6 times or more
4) Execute the function you have selected (except for model setting) by pressing the
POWER button. The buzzer will sound once. The printer will switch off itself after
performing the function.
For the model setting function, select BJF600 or BJC-6000 by pressing the RESUME
button zero or one time respectively. (The buzzer will sound each time the RESUME
button is pressed.)
Press
Zero times
1 time
2 times
Validate the model you have selected by pressing the POWER button. The buzzer will
sound once. (The printer will switch off itself after performing the operation.)
CAUTION
Indicator Functions
Green Service/factory test print
Orange EEPROM information printing
Green EEPROM initializing (reset to default settings, but
model setting is not cleared)
Orange Waste ink counter clear
Green Model setting
Orange Automatic head position adjustment operations
Green Power off
Indicator Model
Green BJ F600
Orange BJC-6000
... Reserve
Use the Black and Color BJ cartridges for the service/factory test printing.
It is not possible to enter Service Mode without cartridges installed. (Also,
the Photo and Color BJ cartridges cannot be used for service/factory test
printing.) If you have changed the model setting, perform the
service/factory test printing for confirmation.
3-18
BJC-6000