Canon BJC 6000 - Color Inkjet Printer Service Manual page 54

Part 3: Operating Instructions
c) Installing the ink tanks
Peel off the protective film from the ink tank, and slowly turn the protective cap off.
Install the ink tanks in the BJ cartridges in the correct positions as indicated by the
label affixed inside the printer. When the cover is closed, the printer undergoes the
ink tank initializing process (approx. 30 seconds), and the carriage moves to the
home position.
CAUTION
d) Replacing the BJ cartridges
When the printer's front cover is opened, the carriage moves to the cartridge
replacement position. Raise the cartridge lock lever to remove the BJ cartridge.
Replace the cartridge with another one and lower the cartridge lock lever to secure it.
When the front cover is closed, the printer starts the BJ cartridge initializing process
(approx. 30 seconds). Store the removed cartridge in the cartridge container.
CAUTION
Protective Film
Protective Film
Figure 3-7 Installing the Ink Tanks
The ink tanks other than the black ink tanks are identical in shape and
size. Paying attention to the colors of the ink tanks, install them in their
correct positions as indicated by the label affixed inside the printer.
When switched OFF, the printer moves the carriage to the capping
position so that it is locked in place by the carriage locking mechanism.
Never pull the carriage's ribbon cable to move the carriage. When the
buzzer sounds four times and the carriage does not return to the
replacement position, even though the front cover is open, the BJ
cartridges may have overheated. Close the front cover and wait for a while
to let the BJ cartridges cool down naturally before reopening the front
cover.
Protective Cap
Protective Cap
3-6
BJC-6000