Disassembly And Reassembly; Notes On Disassembly And Reassembly; Unlocking The Carriage - Canon BJC 6000 - Color Inkjet Printer Service Manual

Part 5: Maintenance

4. DISASSEMBLY AND REASSEMBLY

4.1 Disassembly and Reassembly
When disassembling or reassembling the printer, refer to the parts catalog. The
numbers in the parts catalog illustrations indicate the disassembly sequence. The
parts catalog also contains close-up diagrams for parts requiring special care during
disassembly or reassembly.

4.2 Notes on Disassembly and Reassembly

Note the following when disassembling or reassembling the printer (also refer to the
parts catalog for additional information).

4.2.1 Unlocking the carriage

When the printer is shipped from the factory (or when the cartridges are installed and
the power has been turned off normally), the carriage is locked in the capping position
to secure the cartridges during transportation. When the printer is powered on
properly, the carriage locking is disabled automatically. If the printer cannot be
powered on normally, it will be necessary to manually unlock the carriage. This can
be done by turning the paper eject roller gear half a turn (5 indented notches) in the
direction of arrow 2 with a flat-blade screwdriver while gently pressing the carriage in
the direction of arrow 1. You can also use the carriage key to turn the paper eject
roller gear.
Paper Eject Roller Gear
2
Figure 5-2 Unlocking the Carriage
1
5-4
BJC-6000