Table of Contents
Advertisement
BJC-6000
1.5 Power-Off Sequence Flowchart
Beeper sounds
once
I/F busy set
Indicator blinks
Error reset
When BJ cartridge or ink
tank is replaced while
replacing cartridge
Cleaning operation
Ink detection
Paper ejection
Capping
Sensor/BJ head drive power off
MPU/Printer controller
initialization
EEPROM write
Indicator off
I/F busy reset
CAUTION
• No cartridge
• Capping in progress
• While replacing cartridges, neither of the
two cartridges is in place.
END
Figure 4-8 Power-Off Sequence Flowchart
Unplugging the power cord to turn off the printer causes the printer to
shut off immediately, possibly stopping the capping process before the
capping operation is completed. If the printer has been turned off by
unplugging the power cord, plug the power cord back in and turn the
printer on again, then use the POWER button to turn off the printer before
unplugging the printer.
4-9
Part 4: Technical Reference
Advertisement
Table of Contents
