BJC-2000 Series Setup Instructions
Step 1: Remove All Shipping Tape and Protective Materials
Open the front cover. Grip the top of the cover in the center and pull it toward you.
Note that tape may not be in the exact locations shown here.
Important! Save the box and shipping materials. You may need them later if you have to transport the printer.
Section 2: Install The Paper Output Tray And Paper Support
Hold the paper output tray with the tabs toward the front of the printer.
Make sure the paper guides are down and the paper output tray extension is closed.
Align the edges of the paper output tray with the grooves on the bottom of the printer and insert the
paper output tray.
Insert the tabs on the bottom of the paper support into the slots on the back of the sheet feeder.