BJC-6000
3.3 Disassembly and Reassembly
Disassembly and reassembly must be done according to the relevant parts catalog,
which illustrates the step-by-step procedures to be followed. Additional notes are
provided in
Part5: 4. DISASSEMBLY AND REASSEMBLY (Page 5-4).
The printer uses many plastic parts. Do not apply excessive force to them. In
particular, take care not to break or deform plastic hooks during disassembly.
CAUTION
Hook
Figure 1-12 How to Disengage a Plastic Hook
Some plastic parts contain glass fibers to conform to tight dimensional
tolerances. Plastic hooks are among such parts, lacking flexibility, and
are easily broken. Do not forcibly disengage them using a screwdriver.
Part 1: Safety and Precautions
Never apply excessive force
when releasing a hook.
1-13