Table of Contents
Advertisement
ReScan Bus
ReScan Bus allows swapping the source or target in and out without having to
reboot the system.
Choose option 6 from the menu:
Press ENT to re-scan hardware. The LCD will display the follo wing info.
When the scan is complete the LCD will display the fol
Source Size
Source Size is used to show the capacity of the source.
Choose option 7 from the menu:
Press ENT and the LCD will show the following info.
Then press ENT and the LCD will show the data's size info.
Secure Erase
Secure Erase is used to wipe the data of the hard disk, i t will erase all of HDD of duplicator
(included Source HDD).
Choose option 8 from the menu:
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Press ENT and the LCD will show the following info.
www.addonics.com
6. ReScan BUS
Re-Scan BUS NOW?
Yes
lowing info.
Bus re- scan OK!
7. Source Size
HDD:Hitachi
Size:232.9GB
HDD:Hitachi
Data:200.9GB
8. Secure Erase
Wipe all data.
Continue? No
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
