Table of Contents
Advertisement
Copy HDD
Copy HDD copies data directly from the source hard disk to the target hard disk. Please make
sure that the capacity of the target hard disk is equal o r larger than the source hard disk.
Choose option 1 from the menu:
Press ENT to begin copy. The system will auto-detect the hard di sks and show the following
copying info on the LCD.
The LCD will show the following info during the copyin g process: elapsed time, completed
percentage. The copy speed, capacity and time will vary depending on the source hard disk. Once
the copying process is complete the LCD will display t he following results.
Async Copy HDD
This option is used to specify the size of the source for simplifying further copying operations.
Choose option 2 from the menu:
Press ENT . Before the start of the reproduction, if the console detects that a hard drive
capacity is less than source, then the LCD will show the cor responding channel number.
And then automatically copies. The LCD will display t he following info.
If the replication process to continue to add additi onal hard disk device, LCD will only show the last
completed percentage.
Once the copying process is complete the LCD will disp lay the following results.
Compare
Compare HDD is used to see if the data on a source ha rd disk is identical to the target hard disk
after the Copy HD operation.
Choose option 3 from the menu:
www.addonics.com
1. Copy HDD
HDD:11 232.9GB
Copy-36MB/s
0%
232.9GB 00:00:00
Copy HDD
OK: 11
Fail: 0
2. Async Copy HDD
HDD:10 232.9GB
8
Space Not Enough
Acpy-36MB/s
0%
232.9GB 00:00:00
Async Copy HDD
OK: 11
Fail: 0
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
