Prescan Source; Rescan Bus - Addonics Technologies HDUSI325 User Manual

PreScan Source

PreScan HDD is used to check if the source hard disk can be accessed properly.
It also tests the read speed.
Choose option 3 from the menu:
Press ENT to begin scan. The LCD will display the following info
Once the scan is complete, the LCD will display the corresp onding results

ReScan Bus

ReScan Bus allows swapping the source or target in and out without having to
reboot the system.
Choose option 4 from the menu:
Press ENT to re-scan hardware. The LCD will display the follo wing info.
When the scan is complete the LCD will display the following info.
www.addonics.com
3. PreScan Source
HDD : 1 232.9GB
Scan-90MB/s 1%
230.6GB 00:00:27
PreScan OK!
4. ReScan BUS
Re-Scan BUS NOW?
Yes
Bus re- scan OK!
Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/