Rescan Bus; Source Size - Addonics Technologies HDUS11NB User Manual

ReScan Bus

ReScan Bus allows swapping the source or target in and out without having to
reboot the system.
Choose option 6 from the menu:
Press ENT to re-scan hardware. The LCD will display the following info:
When the scan is complete the LCD will display the following info:
Sou rce Size
Source Size is used to show the capacity of the source.
Choose option 7 from the menu:
Press ENT and the LCD will show the following info.
Then press ENT and the LCD will show the data's size info.
Secure Erase
Secure Erase is used to wipe the data of the hard disk, i t will erase all of HDD of duplicator
(included Source HDD).
Choose option 8 from the menu:
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Press ENT and the LCD will show the following info.
www.addonics.com
6. ReScan BUS
Re-Sc a n BUS NOW?
Yes
Bus re- scan OK !

7. Source Size

HDD: Hitachi
Size: 232.9GB
HDD: Hitachi
Data: 2 00.9GB
8. Secure Erase
Wipe all data.
Continue? No
In Process
Elapsed 01:00
Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/