Table of Contents
Advertisement
Press ENT to begin the comparison. The LCD will display the following info.
Once the comparison is complete the LCD will display the following info as well as the amount of
data on the source hard disk.
Async Compare
Compare HDD is used to see if the data on a source hard disk is identical to the
target hard disk after the Copy HDD operation. While compare process is
on-going, allows you to plug-in additional target drives and comparison will
automatically start for the added target drive.
Choose option 4 from the menu:
Press ENT
to begin the async comparison. The LCD will display the following info.
If the comparison process continues to add additional hard disk device, LCD will only show the
last completed percentage.
Once the copying process is complete the LCD will display the following results.
PreScan Source
PreScan HDD is used to check if the source hard disk can be accessed properly.
It also tests the read speed.
Choose option 5 from the menu:
Press ENT
to begin scan. The LCD will display the following info
Once the scan is complete, the LCD will display the corresp onding results
www.addonics.com
3. Compare HDD
HDD: 11
232.9GB
Comp-23MB/s 0%
232.9GB 00:00:00
Compare OK:11
Fail: 0
Di : 0
4. Async Compare
HDD: 11
232.9GB
ACmp-23MB/s 0%
232.9GB 00:00:00
Compare OK:11
Fail: 0
Di : 0
5. PreScan Source
HDD : 11 232.9GB
Scan-90MB/s 1%
230.6GB 00:00:27
PreScan OK!
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
