Rescan Bus; Source Size - Addonics Technologies HDUS11SNDX User Manual

ReScan Bus

ReScan Bus allows swapping the source or target in and out without having to
reboot the system.
Choose option 6 from the menu:
Press ENT to re-scan hardware. The LCD wi
When the scan is complete the L CD will display the fol

Source Size

Source Size is used to show the capacity of the source.
Choose option 7 from the menu:
Press ENT and the L CD will show the fo llowing info.
Then press ENT and the L CD will show the data's size info.
Secure Erase
Secure Erase is used to wi
(included Source HDD).
Choose option 8 from the menu:
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Press ENT and the L CD will show the fo llowing info.
www.addonics.com
6. ReSc an BUS
ll display t h e follo wing info.
Re-Sc a n BUS NOW?
Yes
Bus re- sc an OK !
7. S ource Size
HDD:Hitachi
Size: 2 32.9GB
HDD:Hitachi
Data: 2 00.9GB
pe the data of the hard disk , i t will erase a l l of HDD of duplicator
8. Secure Erase
Wipe all data.
Continue? No
Technical Support (M-F 8:30am - 6:00pm PST)
lowing info.
Phone: 408-453-6212 Email: www.addonics.com/support/query/