Chapter 30 Lldp Commands; Lldp; Lldp Hold-Multiplier - TP-Link T1600-28TS Cli Reference Manual

Chapter 30
LLDP function enables network devices to advertise their own device information periodically
to neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored
by its neighbor in a standard MIB, so it is possible for the information to be accessed by a
Network Management System (NMS) such as SNMP.

30.1 lldp

Description
The lldp command is used to enable LLDP function. To disable the LLDP
function, please use no lldp command.
Syntax
lldp
no lldp
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable LLDP function globally:
T1600G-52TS(config)#lldp

30.2 lldp hold-multiplier

Description
The lldp hold-multiplier command is used to configure the Hold Multiplier
parameter. The aging time of the local information in the neighbor device is
determined by the actual TTL value used in the sending LLDPDU. TTL = Hold
Multiplier * Transmit Interval. To return to the default configuration, please
use no lldp hold-multiplier command.
Syntax
lldp hold-multiplier
no lldp hold-multiplier
LLDP Commands
multiplier
297