HP LC2000r - NetServer - 128 MB RAM Upgrade Manual page 24

Chapter 2
Removing the Terminator
If your system has at least one processor module, there are terminators
installed in all remaining slots. You must remove a terminator for each
new processor before installing an additional processor module into the
next available slot.
1. Loosen the thumbscrew and open the access cover to the processor slots.
See Figure 2-4.
Both sides of the processor cage have covers and thumbscrews.
Processor Cage
Thumbscrew
2. Open the latches and remove the terminator from the next available slot as
shown in Figure 2-5.
20
HP NetServer LT 6000r Processor Upgrade
Access Cover
Figure 2-4. Removing the Access Cover