Precautions - HP LC2000r - NetServer - 128 MB RAM Upgrade Manual

Precautions

Follow the procedures listed below and in this manual to ensure safe handling of
components and to prevent harm to both you and the HP NetServer.
WARNING
Before removing a cover, always disconnect the power cord(s)
and unplug telephone cables. Disconnect the power cords to
avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects, such as tools
or jewelry. Disconnect telephone cables to avoid exposure to
shock hazard from telephone ringing devices. Note that the
power switch does not turn off the standby power. Disconnect
the power cord(s) to turn off standby power.
CAUTION
This processor module is sensitive to static electricity and can
easily be damaged by improper handling. Use of a grounding
strap is recommended. Read the following information
carefully before you handle the processor:
2
Leave the processor in the sealed antistatic bag until you
are ready to install it.
Use an antistatic service kit, such as 3M 8501/8502/8505
or equivalent.
Before you remove the processor from the antistatic bag,
touch a grounded, unpainted metal surface on the system to
discharge static electricity.
About This Guide