Step 2.
Remove the side cover.
The Side Cover protects the side service bay. The power to the server does not have to be off to
remove the side cover. However, operation of the server without the side cover in place can make it
susceptible to cooling and EMI problems.
Loosen the captive T-15 screws that hold the side cover in place, then grasp the strap handle and
pull the cover away from the server.
Figure 2-6 shows the side cover with captive screw locations.
Figure 2-6
Side Cover with Captive Screws
Chapter 2
Removal and Replace Procedures
Removing and Installing the Diffuser Card
37