HP L1000 - 9000 - 0 MB RAM Manual page 37

Carrier grade addendum - rp5400 series of servers

Hide thumbs Also See for L1000 - 9000 - 0 MB RAM:

Table of Contents

Figure 1-10

6. Connect the end of the cable to your DC power source.

NOTE

The individual wires in the cable are labeled for power and ground leads.

7. Connect the short cable from each DC power supply to the connector on the slide tray directly below the

power supply and latch the connector in place.

Figure 1-11

Chapter 1

Attaching the Cable Strain Relief bar

Connecting the Power Supply to the Slide Tray Connectors

Connecting the Server to DC Power Source

Latch Lock Direction

Installation

Slide Latch

Table of Contents

Rp5400 series