HP L1000 - 9000 - 0 MB RAM Manual page 26

Carrier grade addendum - rp5400 series of servers

Hide thumbs Also See for L1000 - 9000 - 0 MB RAM:

Table of Contents

Installation

Installing the Server in a Rack

4. Use an M5 x 30 screw with a cress cup washer to attach the front of the slide to the vertical

mounting rail. Insert the screw through the slide, through the center hole of the aluminum

spacer, through the vertical mounting rail, and tighten into the clip nut located at that

position.

5. Use a procedure similar to the preceding instructions 1 through 4 to install the right hand

slide/bracket assembly (marked 337079-1R). Then proceed to "Install the Slide Tray

Assembly."

Figure 1-1

Installing the Slider Assembly

Rear

Front

Chapter 1

Table of Contents

Rp5400 series