Brother Quattro 2 6700D Operation Manual page 30

30
3
After finding the opening, press
to .
4
Within the enlarged area, close the opening in the
line.
5
Change the color of the area with the incorrect color
as described in steps 1 through 5 of "2. Selecting the
Area Colors" on page 27.
After colors are specified for all areas, specify the
stitching settings
* If the stitching settings are not to be specified, continue with
the procedure described in "4 Converting to Embroidery
Data" on page 35.
* To erase the entire drawing and start a new one, press
. All data that had been drawn is erased,
and the screen appears as it did when My Custom Design
was started up (see page 45).
* To close the application and use the sewing machine, press
. All data that had been drawn is erased
(see page 46).
* To save created data, continue with the procedure
described in "Saving Image Data" on page 42.
so that it changes