Additional Functions - Brother Quattro 2 6700D Operation Manual

Additional Functions

After the stitching settings are selected, convert the image data to embroidery data.
* To clear the entire area and start a new drawing, press
is erased, and the screen appears as it did when My Custom Design was started up (see page 45).
* To close the application and use the sewing machine, press
drawn is erased (see page 46).
* To save created data, continue with the procedure described in "Saving Image Data" on page 42.
34
Reducing the Pattern Size
The size of the created pattern can be changed.
Select a size from 50%, 70% and 100%.
Notes
• The pattern can also be enlarged or reduced from the embroidering
or embroidery-editing screen of the sewing machine. If the desired
size cannot be selected with this software or if a specific size is
required, adjust the size from the sewing machine.
1
Press in the pattern drawing screen. The screen
shown at the left appears.
2
Press or
Press once to reduce the size to 70%. Press
again to reduce the size to 50%.
To return the size to the original size (100%), press
.
3
Press . The screen returns to the one displayed
before the stitch settings screen was displayed.
beside .
. All data that had been drawn
. All data that had been