Brother Quattro 2 6700D Operation Manual page 17

4. Selecting
For example, select the section to be deleted here.
* Before moving, copying or deleting sections, use
the area to be moved, copied or deleted.
1
Press so that it changes to
2
From the top-left corner of the section, drag the pen
along the screen so that the section completely fits
within the red frame (selection frame) that is drawn.
* The selection frame appears in red.
3
When the frame is the desired size, remove the pen
from the screen.
Notes
• If the desired area could not be selected (the selection frame could
not be drawn), try drawing it again. Touch the screen with the pen
to erase the selection frame that was originally drawn, and then
draw a new selection frame.
• After a selection frame is drawn, pressing any key other than the
copy key or the delete key erases the selection frame.
To draw a selection frame
1
3
.
The red frame is drawn
with the straight line
connecting the starting
point and the ending
point as the diagonal. The
selected area is the part
within that frame.
The size can be adjusted
as desired until the pen is
removed from the screen.
* An angled selection frame,
like the one
shown at the
2
right, cannot be
drawn.
1 Starting point
2 Ending point
3 Selected area
to select
17