Resetting The Microprocessor - Marantz NR1602 Owner's Manual

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
1
Turn off the power using ON/STANDBY
2
ON/STANDBY
Press while simultaneously pressing
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
ENTER
RETURN
.
ENTER RETURN
and .
132