Marantz NR1602 Owner's Manual page 86

Setting items
Dynamic EQ ® ON : Use Dynamic EQ ® .
OFF : Do not use Dynamic EQ ® .
Solve the problem of
deteriorating sound quality
as volume is decreased
or
by taking into account
human perception and
room acoustics. Works with
MultEQ ® .
Reference Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ ® is
listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ ® " is "ON" (vpage 83).
other non-film content.
Dynamic EQ ® Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
BD
Setting details
is displayed when set to "ON".
Setting items
Dynamic Volume ®
Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
OFF : Do not use "Dynamic Volume ® ".
between TV, movies and
other content (between
quiet passages and
•
loud passages, etc.) by
"Medium" or "Light".
automatically adjusting to
• If "Dynamic Volume ® " is set to "Yes" in
the user's preferred volume
Auto Setup
setting.
automatically changed to "Medium".
• Buttons on the remote control unit can be used
for operations.
q Press
AMP-operation mode.
w Press
Each time
changed as shown below.
83
Setting details
is displayed when set to "Heavy",
(vpage 19), the setting is
AMP
to set the remote control unit to
DYN VOL
.
DYN VOL
is pressed, the setting is
Dynamic Volume : OFF Dynamic Volume : Heavy
Dynamic Volume : Light Dynamic Volume : Medium
Audio Adjust