Specifications
n Audio section
• Power amplifier
Rated output:
Front:
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Front:
Maximum effective output power:
75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Center:
75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround:
75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround back:
75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.)
Output connectors:
6 – 8 Ω
• Analog
Input sensitivity/Input impedance:
130 mV/47 kΩ
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
98 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω
P
/ C
B
P
/ C
R
5 Hz – 60 MHz — 0, –3 dB
Frequency response:
signal — 0.7 Vp-p, 75 Ω
B
signal — 0.7 Vp-p, 75 Ω
R
n Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N:
Total harmonic Distortion (at 1 kHz):
n General
Power supply:
Power consumption:
For purposes of improvement, specifications and design are subject to change without notice.
133
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
87.5 MHz – 108.0 MHz
522 kHz – 1611 kHz
1.2 μV (12.8 dBf)
18 μV
MONO
2.0 μV (17.3 dBf)
STEREO 42 μV (34.5 dBf)
MONO
72 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
MONO
0.3 %
STEREO 0.7 %
AC 230 V, 50/60 Hz
220 W
0.2 W (Standby)
3 W (CEC standby)
[AM]