Table of Contents
Advertisement
5
Use
o
p
to
select
the
configuration of the connected
speakers.
NORMAL
Select the "NORMAL" setting to perform
7.1-channel playback using the surround back
speakers.
ZONE2
Select the "ZONE2" setting to assign the unit's
built-in power amplifier for ZONE2 and output the
audio in stereo.
SPKR-C
Select the "SPKR-C" setting to connect the front
speakers via the bi-amp connection.
Front B
Select the "Front B" setting to use the second set
of front speakers for playback.
F.HEIGHT
Select the "F.HEIGHT" setting to use the front
height speaker for playback.
6
RETURN
Press
to exit the "Amp Assign" setting.
7
Set up "Channel Select"
Use
ui
to select "Channel Select", and then press
ENTER
.
Audyssey Auto Setup
Preparation
Set the following items
if necessary.
Amp Assign
Channel Select
Auto Setup Start
[ENTER] Enter
[RETURN]
Channel Select
Surround Back
Measure(2sp)
Subwoofer
Measure
[RETURN] Return
8
Use
ui
to select a channel.
Surround
Select the number of surround back speakers to be
Back
used. In this case, go to step 9.
• "Surround Back" can be set when "Amp Assign" is
set to "NORMAL".
Subwoofer
Select for no subwoofer to be used. In this case, go
to step 10.
60
9
Use
o p
to set whether or not a surround back
channel is measured.
Set for measuring two surround back speakers.
Measure
(2 sp)
Set for measuring a surround back speaker.
Measure
MultEQ
(1 sp)
Set for no measuring of a surround back speaker.
Skip
10
Use
o p
to set whether or not a subwoofer channel
is measured.
Measure Set for measuring a subwoofer.
Cancel
Set for no measuring of a subwoofer.
Skip
11
Press
RETURN
Proceed to
page 17
NOTE
After performing Audyssey ® Auto Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey ® Auto Setup again.
Set up speakers
.
STEP1 Preparation
step 6.
- Quick Links:
- Connection
- Connections
Hide quick links:
Advertisement
Table of Contents
