Marantz NR1602 Owner's Manual page 33

n Listening to preset stations
1
SHIFT/TOP MENU
Press to select
the memory block (A to G).
TUNER
AUTO
Preset Channel
A8 FM 90.10MHz
A7 FM 90.10MHz
A6 FM 90.10MHz
A5 FM 90.10MHz
A4 FM 108.00MHz
A3 FM 98.10MHz
A2 FM 89.10MHz
A1 FM 87.50MHz
[TUNING+/-] Tuning [BAND] Band [T.MODE] Mode
[MEMORY]
[PRESET+/-] Preset Memory [SEARCH] Search
2
PRESET + PRESET –
Press , or
1 – 8 to select the desired preset
channel.
BD
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH/INFO .
TUNER
AUTO
Now Playing
FM ---.-- MHz
DIRECT TUNE
B6
[TUNING+/-] Tuning [BAND] Band [T.MODE] Mode
[SEARCH]
[PRESET+/-] Preset [MEMORY] Memory Search
2
Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding input is cancelled.
3
When setting is completed, press ENTER.
The preset frequency is tuned in.
RDS (Radio Data System)
Note that the RDS function only works when receiving RDS compatible
stations.
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH/INFO
will not function in areas in
which there are no RDS broadcasts.
30
Tuning in radio stations
n RDS search
Use this function to automatically tune to FM stations that provide
the RDS service.
1
TUNER
Press twice to switch the
input source to "TUNER".
2
Press SEARCH/INFO to select
"RDS".
TUNER
RDS
RDS RDS station
PTY Program category
TP Traffic info
RT Radio text
FM 90.10MHz
[PRESET+/-] Tuning
[SEARCH] SearchMode
[TUNING+/-] Tuning [BAND] Band [T.MODE] Mode
[PRESET+/-] Preset [MEMORY] Memory [SEARCH] Search
3
PRESET + PRESET –
Press or .
The search for RDS stations begins automatically.
• If no RDS stations are found with the above operation, all the
reception bands are searched.
• When a broadcast station is found, that station's name appears on
the display.
• If no RDS station is found when all the frequencies have been
searched, "NO RDS" is displayed.
PRESET PRESET
If you press + or – within 5 seconds after the
broadcast station name is shown on the display, you can search for a
different station.