Marantz NR1602 Owner's Manual page 105

Setting items
COMPONENT 1-RCA / 2-RCA
(Component video) None : Do not assign a component video input connector to the selected
Set this to change the input source.
component video input
• At time of purchase, the settings of the different input sources are as
connectors assigned to the
shown below.
input sources.
Input source
BD DVD SAT
GAME TV
Default
setting
An input source to which an component video input connector cannot
be assigned is displayed as "– – –".
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
message "Return settings to the default?"
is displayed. Select "Yes" or "No", and then
ENTER
press
BD
Setting details
BD DVD SAT GAME
1-RCA 2-RCA None None
ENTER
, the
.
Video
Set the source video.
z "GAME" or "TV" can be set when "HDMI"
been assigned.
Setting items
Video Select Source : Play the picture and sound of the input source.
TV
Video of another input BD / DVD / SAT / GAME / TV : Select video input source to view. This can
source is played back be set for individual input sources.
combined with the playing
None
audio.
• "GAME" and "TV" can be selected only when a
• Buttons on the remote control unit can be used
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video appropriate for game content.
Movie : Process video normally.
BD DVD SAT
GAME z z
TV
• If "Video Mode" is set to "Auto", the mode is switched according to the
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
102
Default settings are underlined.
(vpage 101) or "COMPONENT"
Setting details
component video is assigned as an input source.
for operations.
AMP
q Press to set the remote control unit to
AMP-operation mode.
V.SEL
w Press until the desired picture appears.
V.SEL
• To cancel, press to select "Source".
NOTE
(vpage 96) cannot be selected.
input contents.
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
Input Setup
(vpage 102) has