Marantz NR1602 Owner's Manual page 90

Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup.
• If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to
select Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ®
83).
• "System Setup" can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign NORMAL : Select the "NORMAL" setting to perform 7.1-channel playback
The signal output from the using the surround back.
SURR.BACK/AMP ASSIGN ZONE2 : Select the "ZONE2" setting to assign the unit's built-in power
speaker terminal of this unit amplifier for ZONE2 and output the audio in stereo.
can be switched to match SPKR-C : Select the "SPKR-C" setting to connect the front speakers via
your speaker environment. the bi-amp connection.
Front B : Select the "Front B" setting to use the second set of front
speakers for playback. You can switch the front speakers A and B to be
used for playback in accordance with the 2-channel playback or multi-
channel playback mode.
F.HEIGHT : Select the "F.HEIGHT" setting to use the front height speaker
for playback.
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "S.Back" and
"Large" or "Small" speaker.
"F.Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover Freq."
• Large : Use a large speaker that can adequately play back low
(vpage 89) as the
frequencies.
standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
BD
Default settings are underlined.
(vpage 82,
Setting details
Setting items
Speaker Config. Subwoofer : Set the presence of a subwoofer.
(Continued) • Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "S.Back" and "F.Height" can be
set to "Large".
• When "Surround" is set to "None", "S.Back" and "F.Height" are
automatically set to "None".
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2spkrs : Use two surround back speakers.
• 1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
NOTE
When "Amp Assign" setting
make the "S.Back" setting.
87
System Setup
Setting details
(vpage 87) is "NORMAL", you can
vSee overleaf