Connect - Marantz NR1602 Owner's Manual

Connect

• For the method of connecting 7.1-channel system with surround back speakers, see
"Connecting the speakers".
• For the method of connecting the TV, see C page 3 "Connect this unit to the television using an HDMI
cable (sold separately)".
7.1-channel (Front height speaker) connection
The illustration on the right shows a connection example for performing 7.1-channel playback using the
front height speakers.
If you connect the surround back and front height speakers before you start playback, the audio is played
back by automatically switching the speakers in accordance with the surround mode or input signals.
To perform 7.1-channel playback using the front height speaker, set "Amp Assign" to "F.HEIGHT" in steps
3 and 4 for "Set up "Amp Assign"" (vpage 59).
NOTE
C page 6 "Connecting the
• For speaker cable connections, see
• Connect so that the speaker cable core wires do not protrude from the speaker terminal. The
protection circuit may be activated if the core wires touch the rear panel or if the + and – sides
touch each other (vpage 126 "Protection Circuit").
• Never touch the speaker terminals while the power supply is connected. Doing so could result
in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard
screen for making connections.).
• Use speakers with the speaker impedances shown below.
Speaker terminals Speaker impedance
FRONT
CENTER
SURROUND
SURR. BACK / AMP ASSIGN
C page 6
speakers".
6 – 8 Ω
FHL
FL
SW
SL
53
FHR
FR
C
SR